Getting Started with HOVERAir X1 PRO and PROMAX

1. Scan the QR code, download and install the HOVER X1 App.

2. Press and hold the power button for 3 seconds until the green light turns on.
3. Open the 'HOVER' page in the X1 App, then tap the green 'Activate' button to complete the activation.

*Note: Enable location and Bluetooth permissions for the X1 App to connect to your device.

Watch the video below to learn how to activate your X1 PRO or PROMAX.

The Digital Screen will display the current flight mode and parameters. 

Short press the left or right button to change the flight mode; 

Long press the left or right button to toggle through parameters, such as distance or height. 

You can also configure more settings through the app and customize the flight modes displayed on the Digital Screen.

Watch the video below to learn how to switch flight modes and adjust parameters using the Digital Screen.

Power on the device, unfold it, and select flight mode. Point the camera towards your face. Short press the power button or use the voice command: "HOVER, take off." (Coming soon in an upcoming OTA update.)

Or you can also use the Beacon and Joystick for more precise flight control.

*Before takeoff, ensure the battery is fully charged.

*Make sure there is enough space for flight, and avoid areas with pedestrians to ensure safety.

Landing the X1 PRO and PROMAX is simple: place your hand about 20 cm (8 inches) below the device, and it will automatically land. You can also land it manually with the X1 app.

1. You can activate the Return to Home feature by tapping the Return button in the X1 App in manual control mode or by long-pressing Beacon's function button.

*Note: 

a. The flying camera will automatically return when the battery is low. You can also manually activate the return-to-home function and customize the return settings to your preference. 

b. During the return process, the flying camera will fly in a straight line back to the take-off point. Please be mindful of any obstacles in the way; take manual control if necessary. 

c. When operating manually, please confirm the return altitude in the control settings to ensure the flying camera can navigate without obstacles during the return.

2. Long Distance Flight: When in manual control using the X1 App or remote control, please note that different environments may affect the signal strength, which in turn affects the actual transmission distance.

If you need to fly in special conditions, like fly over water, cliff, and in low-light environments, then you need to place the device face up in an open, unobstructed area and wait for about 30 seconds. 

Once the OmniTerrain icon lights up, HOVER is ready to fly over water, cliffs, and in low-light environments. If the icon is not on, avoid flying in these complex conditions, but you can still fly safely in well-lit areas with sufficient ground texture. 

*Note: X1 PRO and PROMAX aren't waterproof, so be sure to use it with caution. When flying over water, keep it at least 1.5 meters (5 ft) above the surface for safety.

1. Tap 'HOVER Album', and after connecting to your device's Wi-Fi, you can preview videos you've shot and download them quickly to your phone.

You can also use the below methods to download your videos:

1. Use a USB-C data cable to connect your computer and the device while it's on, and download the videos directly.

Note: Sound recording is currently only available when exporting videos through the X1 App.

2. X1 PRO and PROMAX support SD cards up to 1TB, so you can remove the SD card and transfer videos directly.

In the top left corner of the HOVER page, you can see the HOVER's battery level and storage space.

Tap the 'HOVER Settings' button and select a flight mode, such as Zoom Out, to adjust distance, flight height, resolution, slow motion, and more. 

In Smart Preview mode, you can monitor what the camera is capturing, and set flight and camera parameters through the X1 App, such as flight height, frame rate, and 2x digital zoom. 

In manual control mode, tap the camera button on the left to adjust settings like ISO, EV, and shutter speed.

In manual control mode, you can pilot the X1 PRO and PROMAX using the virtual joystick or directional buttons. And you can configure the settings by clicking the small gear icon in the top right corner.